Italpresse Automatic Edge Gluing Press Line for Lumber Panels and Beams GB/13 Super

COMPOSITION TABLE

• Frame made with welded beams
• Loading table made by box sections
• Pushing bar driven by chain
• Chains gearbox motor power: KW. 1,1 ‚Äì 1,5
• Feeding speed: Mt/1‚Äô 12
• Useful width: mm. 1300
• Useful length: mm. 4000
• manual control of the feeding bar
• feeding device in cycle with the press
• rapid way back speed: Mt/‚Äô 25

PRESS

• Frame made with welded beams
• Platens dimensions: mm. 1300x4000
• Platens covered with aluminium nr. 2
• Daylights nr. 1
• Total opening: mm. 250
• Stroke: mm. 250
• Loading side: mm. 1300
• Downstroke movement of the platen
• Total thrust: Tons. 150
• Nr. 8 thrust cylinders diameter mm. 85
• Nr. 2 movement cylinders to speed up the opening and the closing of the mobile platen
• Max height of the laminated beams mm. 200

FABRICATED STEEL OR SOLID STEEL DRILLED PLATENS MM 35/37 complete with thermal oil – boiler Kw 36.

HORIZONTAL SIDE CYLINDERS GROUP ASSEMBLED ON PROPER BEAM

• nr. 8 double effect fixed horizontal cylinders complete with pusher (thickness on request) and safety system control.
• total thrust: Metric tons. 100
• fence on the opposite side
• manual single cylinder exclusion

UNLOADING TABLE

• Useful dimensions mm. 1300x4000

- Safety features as per CE standards

OPTIONALS

- PLATENS COVERED WITH STAINLESS STEEL

- MANUAL VERTICAL MICROMETRIC ADJUSTMENT: adjustment of the support bar of the horizontal cylinders from 0 up to 60 mm to press panels with variable thicknesses.

- MOTORIZED VERTICAL MICROMETRIC ADJUSTMENT: adjustment of the support bar of the horizontal cylinders from 0 up to 60 mm to press panels with variable thicknesses.

- PNEUMATIC SYSTEM MOUNTED ON THE FIXED BACK BAR FOR THE DETACH OF THE PANELS from the top platen surface.

- AUTOMATIC SPRAYING SYSTEM on both platens of special anti-gripping grease, to ease the detaching of the panels at the end of the gluing phase and to keep platens clean.

WOOD STRIPS LOADING LINE composed by:

1) MOTORIZED ROLLERS TABLE WITH SIDE AND VERTICAL PUSHERS.

Placed before the gluing station to drive and hold the strips to make easier the spreading of the same.

• width mm. 200
• length mm. 1400
• feeding speed mt/1‚Äô 40-120

2) SPECIAL VERTICAL SPRAY GLUE SPREADER To glue the strips, with an electronic control or allow the gluing of a fixed and programmed number of strips.

• max. useful height mm. 120
• complete with airless pump

3) SINGLE STATION MOTORIZED ROLLER TABLE To receive the glue stripes and transfer them parallel to the feeder, to allow the automatic composition of the panels on the composition table.

• gear motor Kw. 0,37
• rollers diam. mm. 76
• feeding speed mt./1‚Äô 40-120
• width mm. 200

4) PNEUMATIC FEEDER To allow automatically the composition of the panel in a longitudinal way

• max stroke mm. 150

4.1) FENCE

With manual backstroke which accompanies step by step the composition of the wood strips on the loading table and prevents them from falling.